keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
  1. Forum
  3. Telephony Cards Support
  5. A400/800/1200 Series
  7. Upgrade A400P to A1200P - No Dahdi in Asterisk
× Questions about A400/800/1200 Analog Interface Card

Upgrade A400P to A1200P - No Dahdi in Asterisk

13 years 10 months ago #5914 by lisa.gao
hi,
You have reload driver opvxa1200,right? What's the output dahdi_cfg -vvvv after you reload driver? Please post here.
And have you add #include dahdi-channels.conf in chan_dahdi.c ?
Anyway, please let us know further information.
13 years 10 months ago #5915 by lisa.gao
Sorry, a mistake.
And have you add #include dahdi-channels.conf in chan_dahdi.conf?
13 years 10 months ago #5918 by ctarbet
I will add dahdi_cfg -vvvv to my first post.

Yes, I generated dahdi-channels.conf using dahdi_genconf then put #include dahdi-channels.conf in chan_dahdi.conf.

What is the bare minimum working chan_dahdi.conf so I can do some testing?

i] Last edited by ctarbet at 2010-7-16 02:37 [/i
13 years 10 months ago #5919 by ctarbet
I am suddenly having more problems. I think I may have driver issues. How can I remove dahdi and the opvxa1200 module?

service dahdi restart 
Unloading DAHDI hardware modules: done
Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg:  DAHDI_CHANCONFIG failed on channel 1: No such device or address (6)
                                                           [FAILED]
13 years 10 months ago #5920 by ctarbet
The problem suddenly vanished. :( Everything came online just like that. It sucks that I have been through all this trouble and never found the real issue.
13 years 10 months ago #5921 by svolta
Can you send your SSH to me, I will check it for you.
My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
MSN: This email address is being protected from spambots. You need JavaScript enabled to view it.
  1. Forum
  3. Telephony Cards Support
  5. A400/800/1200 Series
  7. Upgrade A400P to A1200P - No Dahdi in Asterisk
Time to create page: 0.046 seconds
Powered by Kunena Forum